With FieldStack, you have the option of accepting either physical or a digital signatures for credit card transactions on the PAX S300 credit card terminal. Here are the Configuration settings you will need to apply in order to use the digital signature capture feature:


In Configuration Management, press Select this machine configuration. In the Filter box, type in the keyword "signature". This will filter the visible settings to two. Here are the required configurations:

  • Semi-Integrated Payment Terminal also does signature capture -- True


Press the Save Machine Settings button on the bottom of the screen before continuing. 


With your machine configured, you must now ensure your machine's location is setup for digital signature capture. Select your location in the selector on the left hand side of the screen. Ensure the keyword "signature" is still in your Filter box. There should be 7 settings available. Here are their required configurations:

  • Use capture device for Credit Card Signature -- True
  • Do not print merchant receipt if terminal captures signature -- True
  • Is signature shown on screen when merchant receipt disabled -- True


Press the Save Location Settings button on the bottom of the screen before continuing. 


*NOTE* YOU MUST RESTART FIELDSTACK AFTER CHANGING YOUR SETTINGS FOR THEM TO TAKE EFFECT.